Table of Contents
Advertisement
5-i nch High Speed Dome User Ma nual
2. Click IRIS+ on each submenu, e.g. CLEAR ALL PATTERNS. Click IRIS+ again to confirm and exit.
On DIAGNOSTICS submenu, you can also see the self-diagnostics information of the speed dome,
including the occurrence of high temperature, the highest temperature, the occurrence of low
temperature, the lowest temperature, the occurrences of video loss, low voltage, dome reboot,
panning loss, tilting loss and communication loss.
Note:
Panning loss and tilting loss refer to the failures of panning and tilting, for diagnosing the
electric motor of the speed dome.
3.5 Configuring and Handling Alarms
3.5.1 Configuring Alarm Input and Linked Actions
Purpose:
This section explains how to configure the speed dome to respond to alarm events with alarm
linked actions, such as calling presets, patrols, patterns, scanning, etc.
Steps:
1. Move the cursor to enter the alarm configuration submenu:
MAIN MENU > DOME SETTINGS > ALARMS > ALARM SETTING
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
CLEAR SETTINGS
CLEAR ALL PRESETS
CLEAR ALL PATROLS
CLEAR ALL PATTERNS
CLEAR ALL BLANKS
CLEAR ALL ZONES
CLEAR ALL TIME TASKS
<DIAGNOSTICS>
BACK
Figure 3-23
DIAGNOSTICS
HIGH TEMP
HIGHEST TEMP
35° C
LOW TEMP
LOWEST TEMP
14° C
VIDEO LOSS
LOW VOLATE
POWER UP
BACK
EXIT
Figure 3-24
EXIT
Clear Dome Settings
DIAGNOSTICS
0
PAN LOST
TILT LOST
0
CAMERA LOST
0
0
0
BACK
Self-diagnostics
0
0
0
EXIT
27
Advertisement
Table of Contents
