Configuring Zones - HIKVISION DS-2AF1-764 User Manual

5-i nch High Speed Dome User Ma nual
(4) Click IRIS+ to confirm and exit.
Note: The weekday can be set to be from Monday to Sunday or Whole Week.
6. Preview the time task.
Move the cursor to TASK PREVIEW and click IRIS+ to view the time, action and status of the
scheduled task.
7. Delete the time task.
Move the cursor to CLEAN TASK and click IRIS+ to delete the time and action of the current task.

3.4.6 Configuring Zones

Purpose:
A zone is a panning and tilting area defined by the left/right and up/down limit stops. You can
configure the zones on ZONES submenu. You can define a zone when the targeted surveillance
scene is limited.
Steps:
1. Move the cursor to enter the zone configuration submenu:
MAIN MENU > DOME SETTINGS > ZONES
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
WEEK WHOLE WEEK
START(H-M) 00
END(H-M) 00
DONE: OPEN
QUIT: CLOSE
Set the Task Time
Figure 3-20
NUM TIME
1 WHO 0 0 0 0
2 WHO 0 0 0 0
3 WHO 0 0 0 0
4 WHO 0 0 0 0
5 WHO 0 0 0 0
6 WHO 0 0 0 0
7 WHO 0 0 0 0
8 WHO 0 0 0 0
Preview the Task Time
Figure 3-21
00
00
ACTION STATE
NONE OFF
NONE OFF
NONE OFF
NONE OFF
NONE OFF
NONE OFF
NONE OFF
NONE OFF
25