Table of Contents
Advertisement
User Manual of HD-TVI Speed Dome
NEAR ON (enable near/medium-distance IR LED), AUTO (enable IR LED automatically
according to the environment illumination), ICR (adjust the IR LED working mode according
to the ICR), and CLOSE (disable IR LED).
Set the IR LED switch delay.
The SWITCH DELAY(S) refers to the delay time between the switch of far-distance IR LED and
N/M-distance IR LED.
3.4 Configuring PTZ Control Parameters
Purpose:
You can configure panning, tilting and zooming movements, and configure PTZ control functions
including presets, patrols, patterns, etc. for the speed dome.
3.4.1 Configuring PTZ Parameters
Enter PTZ configuration menu:
MAIN MENU > DOME SETTINGS > MOTION SETTINGS
Auto-flip
In manual tracking mode, when a target object goes directly beneath the speed dome, the speed
dome automatically rotates 180 degrees horizontally for tracking.
AUTO-FLIP is set as ON for this speed dome by default and it's not user-definable.
Proportional Panning
When the speed dome is zooming in/out, you can enable the proportional panning function to
automatically reduce or increase the panning and tilting speed according to the zooming amount.
This function enables the speed dome to trace the object at a proper speed when the speed dome
is zooming and the monitored scene is narrowed (zoom in) or enlarged (zoom out).
You can set PROPORTIONAL PAN as ON or OFF to enable/disable the function.
This function is enabled automatically while setting the patterns.
© Hikvision
Lo-Call 1890 866 900
MOTION
AUTO FLIP
ON
PROPORTIONAL PAN
ON
PARK TIME
5
PARK ACT
NONE
SCAN SPEED
28
IMAGE FREEZING
OFF
DOME SPEED
6
BACK
EXIT
Figure 3-11 PTZ Configuration
www.cctvireland.ie
MOTION
PRESET SPEED
4
ENABLE LIMIT
OFF
LIMITS SETTING
CLEAR LIMITS
SET ELEVATION
ON
BACK
EXIT
hikvision@cctvireland.ie
21
Advertisement
Table of Contents
