Summary of Contents for HIKVISION DS-2CE16DF7T-IT3Z
Page 1
TURBO HD D(F)7T Series Bullet & Turret Camera User Manual UD00380B User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to the models below: Type Model DS-2CE16D(F)7T-AIT3Z...
Privacy Notice Surveillance laws vary by jurisdiction. Check all relevant laws in your jurisdiction before using all this product for surveillance purpose to ensure that your use of this product conforms. Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules.
1 Introduction 1.1 Product Features This series of camera adopts high performance sensor and advanced circuit board design technology. It features high resolution, low distortion, and low noise, etc. It is suitable for surveillance system and image process system. The main features are as follows: High performance CMOS sensor and high resolution bring high-quality image;...
2 Installation Before you start: Please make sure that the device in the package is in good condition and all the assembly parts are included. Make sure that all the related equipment is power-off during the installation. Check the specification of the products for the installation environment.
Page 5
4. Connect the corresponding cables. 5. Adjust the camera according to Figure 2-3 to get an optimum angle. 1). Loosen the P screw to adjust the pan direction [0°~360°]. Tighten the screw after completing the adjustment. 2). Loosen the T screw to adjust the tilt direction [0°~90°].
Page 6
5. Connect the corresponding cables and install the gang box cover with fixing screws. Figure 2-6 Fix the Camera to the Ceiling/Wall 6. Refer to step 5 of 2.1.1 to adjust the camera to get an optimum angle. 2.2 Installation of Type II Camera Steps: 1.
6. Tighten the screws with the wrench. 7. Adjust the camera according to Figure 2-10 to get an optimum angle. Pan Position Range [0°-360°] Tilt Position Range [0°-75°] Rotation Position Range [0°-360°] Figure 2-10 3-axis Adjustment 3 Menu Description SETUP FORMAT MAIN MENU FOCUS...
3.3 Main Menu 3.3.2 AE (Auto Exposure) AE describes the brightness-related parameters. You can adjust the image brightness by the BRIGHTNESS, EXPOSURE MODE, and GAIN in different light conditions. EXPOSURE BRIGHTNESS EXPOSURE MODE MIDDLE GAIN RETURN Figure 3-2 AE BRIGHTNESS Brightness refers to the brightness of the image.
Page 9
You can set the R GAIN/B GAIN value from 0 to 255 to adjust the shades of red/blue color of the image. MODE R GAIN B GAIN RETURN Figure 3-3 MWB Mode 3.3.4 DAY-NIGHT Color, B/W, and SMART are selectable for DAY and NIGHT switches.
SHARPNESS Sharpness determines the amount of detail an imaging system can reproduce. You can set the SHARPNESS value from 1 to 10. COLOR GAIN Adjust this feature to change the saturation of the color. The value ranges from 1 to 10. DNR (Digital Noise Reduction) The DNR function can decrease the noise effect, especially when capturing moving images in low light...