Configuring Ptz Control Parameters; Configuring Ptz Parameters - HIKVISION DS-2AE5223TI-A User Manual

User Manual of HD-TVI Speed Dome
The SWITCH DELAY(S) refers to the delay time between the switch of far-distance IR LED and
N/M-distance IR LED.

3.4 Configuring PTZ Control Parameters

Purpose:
You can configure panning, tilting and zooming movements, and configure PTZ control functions
including presets, patrols, patterns, etc. for the speed dome.

3.4.1 Configuring PTZ Parameters

Enter PTZ configuration menu:
MAIN MENU > DOME SETTINGS > MOTION SETTINGS
 Auto-flip
In manual tracking mode, when a target object goes directly beneath the speed dome, the speed
dome automatically rotates 180 degrees horizontally for tracking.
AUTO-FLIP is set as ON for this speed dome by default and it's not user-definable.
 Proportional Panning
When the speed dome is zooming in/out, you can enable the proportional panning function to
automatically reduce or increase the panning and tilting speed according to the zooming amount.
This function enables the speed dome to trace the object at a proper speed when the speed dome
is zooming and the monitored scene is narrowed (zoom in) or enlarged (zoom out).
You can set PROPORTIONAL PAN as ON or OFF to enable/disable the function.
This function is enabled automatically while setting the patterns.
© Hikvision
MOTION
AUTO FLIP
PROPORTIONAL PAN
PARK TIME
PARK ACT NONE
SCAN SPEED
IMAGE FREEZING OFF
DOME SPEED
BACK EXIT
Figure 3-11 PTZ Configuration
MOTION
PRESET SPEED
ON
ENABLE LIMIT
ON
LIMITS SETTING
5
CLEAR LIMITS
28 SET ELEVATION
6
BACK
4
OFF
ON
EXIT
21