Chapter 2 Getting Started; Power-Up Action; System-Defined Presets - HIKVISION DS-2AF1-764 User Manual

5-i nch High Speed Dome User Ma nual
Before you start:
You can operate the speed dome using a control device. The control devices include the control
keyboards, DVRs, DVSs, etc. In this and the following chapters, operation of the speed dome by the
IE browser of a DVR will be taken as an example.
Note: Please make sure that the baudrate, date bit and address have been configured to the same
as those of the speed dome in the remote configuration interface of the control device. Please refer
to Table 2-1 for details of the configuration.

2.1 Power-up Action

After the power is applied, the speed dome will perform a series of self-test actions which include
lens actions and pan and tilt movements. After the power-up self-test actions, the system
information will be displayed for 2 minutes on the live view screen as shown below.
System Info
TYPE
SN
ADDRESS
COM Format
VERSION
BUILD DATE

2.2 System-defined Presets

Purpose:
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.

Chapter 2 Getting Started

TYPE
SN
ADDRESS
COM FORMAT
PROTOCOL SELF ADAPTIVE
VERSION
BUILD DATE
CHECKING CAMERA
Figure 2-1
Description of System Information
Table 2-1
Description
The model of the speed dome.
The serial number of the speed dome.
The default communication address of the speed dome.
The communication settings of the speed dome. Baudrate(4
digits), data bit(1 digit) and stop bit(1 digit).
The version of the firmware.
The date when the program of the software is compiled.
DS- 2AF1-***
000000335
0
2400,8,1
2. 20
12 03 31
System Information
3