Table of Contents
Advertisement
5-i nch High Speed Dome User Ma nual
You can set the alarm related parameters following below instructions , including linkage action
interval, alarm duration and dome activity resumption.
Steps:
1. Enter the alarm parameter configuration menu:
MAIN MENU > DOME SETTINGS > ALARMS > ALARM SETTING
2. Configure the interval of the alarm sequence.
When more than one alarm of the same priority occurs at the same time, the speed dome will
respond to one alarm first and then respond to the next one after the user-defined interval. You
can set the on ALARM SEQUENCE submenu from 1 to 200 seconds.
3. Configure the alarm rest delay.
If there's a linkage action has already been triggered by an alarm input, the speed dome will
only respond to the input from the same channel again after the user-defined reset delay time.
This is the rest time that the speed dome considers an alarm to be active when it's physically
cleared. You can set the ALARM REST DELAY from 0 to 300 seconds.
4. Resume the dome activity.
You can set ALARM RESUME to ON to enable the speed dome to resume its previous activity
after the triggered actions finished.
Notes:
If the speed dome is moving when a linkage action is triggered, it will stop at the current
position and resume from this position after the linkage action finishes.
The speed dome can be configured to resume the PTZ positions, focus and iris value.
3.5.3 Configuring Auxiliary Alarm Output
Purpose:
An auxiliary output is a configurable alarm output interface on the speed dome back box which can
connect and trigger another alarm device to operate.
Steps:
1. Enter the alarm auxiliary output configuration submenu:
MAIN MENU > DOME SETTINGS > AUXS
2. Click IRIS+ to edit the status of the auxiliary outputs. You can set the alarm output type as OPEN
(normally open) and CLOSE (normally closed).
© Hikvision Digital Technology C o., Ltd. All Rights Reserved.
AUX
AUX1
DWELL TIME
AUX1
DWELL TIME
BACK
EXIT
Configure the AUX Output
Figure 3-26
CLOSE
2
OPEN
0
29
Advertisement
Table of Contents
