Input Key Function - Hubsan H502S Instruction Manual

7.1 INPUT KEY FUNCTION

S/N Mode/ Control
MODE 1
(1)
Throttle/Aileron Stick
MODE 1
(2)
Elevator/Rudder Stick
MODE 2
1
Throttle/ Rudder Stick
MODE 2
2
Elevator /Aileron Stick
3 Aileron Trim
4 Elevator Trim
5 Rudder Trim
6 Throttle Trim
7 Power Switch
8 Photo
9 Video
Video glasses socket
10
11 TF card plug
12
GPS SW
RTH SW
13
14
USB plug
©
13
2015 Hubsan
哈博森科技 版权所有
Push the stick forward or backward and the quadcopter will
ascend or decend; Push the stick left or right and the quadcopter
will fly to left or to right.
Push the stick forward or backward and the quadcopter will fly
forward or backward;Push the stick left or right and the quadcopter
will rotate in counter clockwise or in clockwise.
Push the stick forward or backward and the quadcopter will
ascend or decend; Push the stick left or right and the quadcopter
will rotate in counter clockwise or in clockwise
Push the stick forward or backward and the quadcopter will fly
forward or backward;Push the stick left or right and the quadcopter
will fly to left or to right
Aileron trim adjusts for left and right drift.
Elevator trim adjusts for forward and backward drift.
Rudder trim adjusts for drift of left and right rotation or yaw.
Throttle trim normally left at neutral. The lower trim turns LEDs
on and off.
Push to ON to turn on the transmitter. Push to OFF to turn off.
Press the photo button to shoot photos;
Press video button and start the record and press again to stop
Connect Hubsan video glasses (The video glass is excluded)
The TF card can be inserted into the card plug on theTX or the
quad copter.
(Recommend on the quad copter )
Push the switch up, the bulit-in GPS will calculate the quad
copter's position and height and help to keep the quad copter in a
stable hover (ONLY FOR OUT DOOR)
Push the switch up, the quad copter will return to the home
point automatically ( ONLY FOR OUT FOOR)
Only for engineer to upgrade the software, please do not use it to
connect computer
Function