Headless Mode; Follow Me Mode; Exit Rth Mode - Hubsan H502S Instruction Manual

EXIT RTH MODE

Pull down the RTH Switch, the X4 will exit the RTH Mode.

6.3 HEADLESS MODE

Headless mode means the X4
will default its nose direction
as the up ahead when the mode
is activated.
Press the Throttle stick 0.5 second to switch on/ off headless mode.
Press the stick to enter into the headless Mode, indicated by two "beeps" sounds and the
"Headless On" displays on the LCD.
Press the stick again to exit headless Mode, indicated by one "beep" sound and the
"Headless Off" displays on the LCD.

6.4 FOLLOW ME MODE

Follow me mode means the
drone follows the transmitter
automatically due to the
built-in GPS system.
MODE 2
MODE 2
MODE 1
MODE 1
©
2015 Hubsan
10
哈博森科技 版权所有