Table of Contents
Advertisement
position 1 (upward)
GPS Switch
Photo Button
Important Note: The GPS and RTH functions are only available
outdoor.Please make sure the two switches keep downward when
indoor.
5.4 PHOTO/VIDEO
PHOTO
Press the Photo/Video button for 0.5 second to take photos.
Press the Photo/Video button for 1.5 second to take videos and press again to save the videos.
Please stop recording before the SD card removed.
1. The video will stop when the transmitter battery runs low.
2. When the memory of SD card is full, he screen will display "SD Full".
3. It is best to use a class 4+ SD card, and the capacity should no less than 4GB.
4. Format the SD card in the transmitter before use.
position 2 (downward)
RTH Switch
Video Button
The GPS Switch controls the position-hold
function.
In position 1 (up), the GPS function works.
In position 2 (down), the GPS function is
inactive.
The RTH Switch controls the automatic return
home function.
In position 1 (up), the RTH function works.
In position 2 (down), the RTH function is
inactive.
For the Photo/Video function, please
always power off the quadcopter and
the transmitter when inserting or
removing the SD card
VIDEO
©
2015 Hubsan
08
哈博森科技 版权所有
Hide quick links:
Advertisement
Table of Contents
