Start To Fly; The Flight Environment; Arm/Disarm The Motors - Hubsan H502S Instruction Manual

Fpv x4 desire
Hide thumbs Also See for H502S:
Table of Contents

Advertisement

5. START TO FLY

5.1 THE FLIGHT ENVIRONMENT

(1) The flying area should be open and without tall buildings or other obstacles; the steel
structure within building would interfere with the compass and the GPS signal.
(2) DO NOT fly in bad weather such as strong wind, heavy snow, rain or foggy day.
(3) Keep away from barriers, people, power cables, trees, and other obstructions.
(4) Do not fly near radio towers or airports.
(5) The X4 control system wil not work properly at the South or North Pole
(6) DO NOT fly in restricted areas and please obey your country's laws and regulations.
High Tension Line
5.2 ARM/ DISARM THE MOTORS
Arm the motors
Method : Pull the left stick to the left lowest corner and the right
stick to the right lowest corner as the picture shows. Release
both sticks after the motors armed.
Disarmed the motors
Method : Pull the left stick to the left lowest corner and the right
stick to the right lowest corner again, and release both sticks after the motors disarmed.
Do not stop the motors during the flight to avoid any crash.
Push the sticks as slightly as you can. Release the sticks after the motors armed or disarmed.
Airport
Magnetic
Rain
©
2015 Hubsan
06
哈博森科技 版权所有

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents