Input Key Function - Hubsan FPV X4 Desire Instruction Manual

7.1 INPUT KEY FUNCTION

S/N Mode/ Control
MODE 1
(1)
Throttle/Aileron Stick
MODE 1
(2)
Elevator/Rudder Stick
MODE 2
1
Throttle/ Rudder Stick
MODE 2
2
Elevator /Aileron Stick
3 Aileron Trim
4 Elevator Trim
5 Rudder Trim
6 Throttle Trim
7 Power Switch
8 Photo
9 Video
Video glasses socket
10
11
GPS SW
RTH SW
12
13 USB plug
©
13
2016 Hubsan
哈博森科技 版权所有
Push the stick forward or backward and the quadcopter will
ascend or decend; Push the stick left or right and the quadcopter
will fly left or right.
Push the stick forward or backward and the quadcopter will fly
forward or backward;Push the stick left or right and the quadcopter
will rotate counter clockwise or clockwise.
Push the stick forward or backward and the quadcopter will
ascend or decend; Push the stick left or right and the quadcopter
will rotate counter clockwise or clockwise.
Push the stick forward or backward and the quadcopter will fly
forward or backward;Push the stick left or right and the quadcopter
will fly left or right.
Aileron trim adjusts for left and right drift.
Elevator trim adjusts for forward and backward drift.
Rudder trim adjusts for drift of left and right rotation or yaw.
Throttle trim is normally left at neutral. The lower trim turns LEDs
on and off.
Push to turn on the transmitter. Push again to turn off.
Press the photo button to shoot photos.
Press video button to start recording and press again to stop.
Connect Hubsan video glasses (The video glass is not included)
Push the switch up, the bulit-in GPS will calculate the quad
copter's position and height and help to keep the quad copter in a
stable hover (ONLY FOR OUTDOORS)
Push the switch up, the quad copter will return to the home
point automatically ( ONLY FOR OUTDOORS)
For upgrading the software
Function