Gps Positioning/Home Point Setting; Rth Mode (Return To Home); Advanced Performance Setup - Hubsan H502S Instruction Manual

6. ADVANCED PERFORMANCE SETUP

6.1 GPS POSITIONING/ HOME POINT SETTING
1.) GPS Positioning works ONLY when the GPS signal has no less than 6 satellites.
Pull up the GPS switch to activate the GPS positioning.
Pull down the GPS switch to exit the GPS positioning and only altitude hold works.
2.) Home Point is recorded when armed the motors with no less than 6 GPS satellites.
3.) It should be in an open place to search for the GPS satellites, it'll take 3 mins to finish the
searching, and the GPS signal strength depends on the flying environment.

6.2 RTH MODE (RETURN TO HOME)

ENTER INTO RTH MODE
Push the GPS Switch and the RTH Switch up, and the quad copter will enters into RTH mode.
The flight control system will control the quad copter fly back to the home point and landing
automatically.
!
The RTH MODE only works when the GPS mode is activated with no less than 6 satellites.
The Home Point is recorded when armed the motors with no less than 6 GPS satellites.
©
2015 Hubsan
09
哈博森科技 版权所有
00:23:59
7.3V 7.3V
00:00:00
S: 0.1m/s
R 0
H: 0.0m P 0
D: 0.0m H 247
GPS 6 N22.7914931 E:114.0479740
GPS 6 N:22.7914650 E:114.0479983
Altitute
00:23:59
7.3V
00:00:00
S: 0.1m/s
H: 0.0m
D: 0.0m
GPS 6 N22.7914931 E:114.0479740
GPS 6 N:22.7914650 E:114.0479983
Altitute
7.3V
R 0
P 0
H 247