1
2
Figure 11: Securing shelf brackets
Secure the Mounting Hardware
Use these steps to secure the mounting hardware to the switch.
1. Locate the two front mounting brackets in the shipping carton.
2. Secure the front mounting brackets on either side of the switch, as shown in
Director 2/64 Installation Guide
1
2
3
4
Marker hole
Square opening in rail
Figure
12. For each front mounting bracket, use the two (2) flathead
countersunk Phillips screws (10-32 x 0.25 in) provided.
Installing and Configuring the Director
Screws with captive lock and flat washers
3
Square alignment washers
4
SHR-2265B
49