Table of Contents
Advertisement
Installing and Configuring the Director
Note:
alert, type of alert (Rx, Tx, or Rx or Tx), and alert state (inactive or active).
Figure 53: Configure Threshold Alerts dialog box
2. Click New. The New Threshold Alert dialog box displays, as shown in
Figure 54: New Threshold Alerts dialog box—first screen
3. Enter a name from one to 64 characters in length. All characters in the ISO
102
If alerts are configured, they will display in table format showing the name of the
Figure
54.
Latin-1 character set, excluding control characters, are allowed.
Director 2/64 Installation Guide
Advertisement
Table of Contents
