Director Operational States And Symbols - HP StorageWorks Director 2/64 Installation Manual

Installing and Configuring the Director
Table 6: Director Operational States and Symbols
Operational—Director-to-server communication has been established,
the director is operational, and no failures are indicated.
Degraded—Director-to-server communication has been established,
but the director is operating in degraded mode and requires service.
This condition is typical if a port or redundant FRU fails. Go to
Failed—Director-to-server communication has been established, but
the director failed and requires immediate service. Go to
Status Unknown—The director status is unknown because of a network
communication failure between the director and HAFM appliance. Go
to step
2. Right-click the Director 64 icon. A pop-up menu for the selected director
3. Check director status at the Hardware View page and complete one of the
80
2.
displays, as shown in
In the example, the director's status is operational as indicated by the green
circle in the alert panel.
following steps:
a. If the director displays as operational (no FRU alert symbols), go to
"Configuring Feature
b. If director operation displays as degraded or a director failure is indicated
(FRU alert symbols and a yellow triangle or red diamond at the alert
panel), refer to the HP StorageWorks Director 2/64 Service Manual.
Operational State
Figure 41.
Key" on page 107.
Symbol
No Status
Symbol
step 2.
step 2.
Director 2/64 Installation Guide