Launching Hafm From The Remote Client - HP StorageWorks Director 2/64 Installation Manual

Installing and Configuring the Director
5. To install the HAFM remote client application, scroll down to the information
6. After you have downloaded the installer executable, the InstallAnywhere

Launching HAFM from the Remote Client

Use these steps to launch HAFM from a remote client:
1. Double-click the HAFM icon to launch HAFM. The HAFM 8 Log In dialog
Note:
password is password. The user name and password are case-sensitive.
Figure 62: HAFM 8 Log In dialog box
2. Enter the HAFM appliance IP address in the Network Address field. If you
3. Enter your user name and password in the User Name and Password fields.
114
that pertains to your platform and follow the instructions provided.
Wizard displays. Follow the instructions provided to continue the installation.
box displays, as shown in
The default Windows 2000 user name is Administrator and the default
are logging in to the local HAFM appliance, the HAFM appliance name is
localhost.
The default address that displays in the Network Address field is the address
of the last server accessed. Click the HAFM appliance arrow to see the
network addresses of all HAFM appliances that were accessed from the
computer you are logged into.
If you want to connect to an HAFM appliance that is not listed, enter the IP
address in the Network Address field.
User names and passwords are case-sensitive.
Figure 62.
Director 2/64 Installation Guide