Rail Tray Mounting Location Requirement - HP StorageWorks Director 2/64 Installation Manual

Installing and Configuring the Director
Figure 17: Rail tray mounting location requirement
4. Position and attach both rear brackets, as shown in
56
a. Locate the lowest U of the 9Us chosen for mounting the switch (the
lowest being U1).
b. Attach each rear rail tray bracket to the rear rack uprights at U1 (one on
the left and one on the right.
c. Secure each rail tray bracket using one M5 Torx screw.
Figure 18:
Director 2/64 Installation Guide