Comn Properties Dialog Box - HP StorageWorks Director 2/64 Installation Manual

Installing and Configuring the Director
Figure 34: COMn Properties dialog box
7. Configure the Port Settings parameters as follows:
8. Click OK. The HyperTerminal window displays.
9. At the > prompt, enter the user-level password (the default is password) and
10. At the C> prompt, enter ipconfig and press Enter. The HyperTerminal
74
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
press the Enter key. The password is case-sensitive. The HyperTerminal
window displays with a C> prompt at the top of the window.
window displays, as shown in
MAC Address
IP Address (default is 10.1.1.10)
Subnet Mask (default is 255.0.0.0)
Gateway Address (default is 0.0.0.0)
Auto Negotiate
Speed
Duplex
Figure 35.
Director 2/64 Installation Guide