Calibration Settings - Thermo Scientific Orion 2120XP User Manual

Analyzer Operation
Warning: The reset command will erase all operator settings, logs and calibration data. The analyzer will
need to be set up and calibrated again before it can resume operation.
Default Operator Action
RSET
Press
To Reset the Analyzer:
Press
Press
Press
When the reset is complete, the system
will return to the measure mode. The
operator will need to re-enter the setup
mode to continue programming the setup
parameters. Press
setup mode.
To Abort the Reset:
Press
setup mode
Press
Warning: Resetting the analyzer will erase all stored information including relay, logs and

calibration settings.

Thermo Scientific Orion 2120XP Calcium Hardness Analyzer User Guide
to reset the analyzer
to return to the
to return to the main
to scroll to the next menu
Scrolling Marquee
RSET
(flashing)
PUSH TEST VIEW ENTER
TO RESET
PUSH TEST VIEW ENTER
TO RESET
PRESS TEST VIEW ENTER
TO RESET
RSET
(flashing)
Main Display Notes
SEL
SCrn
rSEt
?
rSEt This command resets
all previously set
?
parameters to factory
default values. Use
this command only
to set the analyzer to
original factory setup
values.
rSEt
?
SEL
SCrn
III-16