The Neuro Mobile App - With New Direct Midi-Usb Support - Source Audio EQ2 Programmable EQ User Manual

The Neuro Mobile App — with New Direct MIDI-USB Support
Like all Source Audio One Series pedals, the EQ2 is fully supported in the Neuro Mobile app. The
Neuro Mobile app is available for iOS and Android devices and allows access to all of the preset
parameters and hardware options described in the Neuro Desktop editor section above.
Connecting to the Neuro Mobile App (USB-MIDI)
The EQ2 is the first Source Audio pedal to add two-way communication with the Neuro Mobile app
using MIDI over USB. To connect the EQ2 to the mobile device you will need the proper cable
adapters.
•
iOS Devices – Any iOS device with a lightning connector is supported. A "Lightning to USB
Camera Adapter" is required. Connect the adapter to the USB A/B-mini cable that was
included with your EQ2
•
Android Devices – Android devices may have either USB-micro or USB-C connectors that will
support MIDI over USB communication with the EQ2. You will need the appropriate USB B/C
(male) to USB A (female) adapter to use with the included USB A/B-mini cable. Note that the
USB B-micro to USB A adapter is sometimes called an OTG (On-The-Go) adapter.
SA270 EQ2 User Guide 30