The Neuro Mobile App - With New Direct Midi-Usb Support - Source Audio Atlas Compressor SA252 User Manual

The Neuro Mobile App — with New Direct MIDI-USB Support
Like all Source Audio One Series pedals, the Atlas is fully supported in the Neuro Mobile app. The
Neuro Mobile app is available for iOS and Android devices and allows access to all the preset
parameters and hardware options described in the Neuro Desktop editor section above.
Connecting to the Neuro Mobile App (USB-MIDI)
The Atlas is the fourth Source Audio pedal after the EQ2, Ultrawave and C4 to add two-way
communication with the Neuro Mobile app using MIDI over USB. To connect the Atlas to the mobile
device you will need the proper cable adapters.
•
iOS Devices – Any iOS device with a lightning connector is supported. A "Lightning to USB
Camera Adapter" is required. Connect the adapter to the USB A/B-mini cable that was
included with your Atlas.
•
Android Devices – Android devices may have either USB-micro or USB-C connectors that will
support MIDI over USB communication with the Atlas. You will need the appropriate USB
B/C (male) to USB A (female) adapter to use with the included USB A/B-mini cable. Note that
the USB B-micro to USB A adapter is sometimes called an OTG (On-The-Go) adapter.
SA252 Atlas Compressor User Guide 24