Drive Blank; Removing A Power Supply/Blower Assembly; Removing The Power Supply/Blower Assemblies - HP StorageWorks 2500 User Manual

2
1
Figure 15 Drive blank

Removing the power supply/blower assemblies

To remove a power supply/blower assembly:
1. Lift the mounting latch
out of the enclosure.
2. Place the power/supply blower assembly on an antistatic work space.
1. Power cord lock
2. Mounting latch
3. Blower
Figure 16 Removing a power supply/blower assembly
Removing the EMU
To remove the EMU:
1.
Grasp the EMU handle
the enclosure
2. Place the EMU on an antistatic surface.
30
Installation
25205a
(Figure 16-2), grasp the blower and pull the power supply/blower assembly
Figure 17-1) and taking care not to tilt it, pull the EMU module straight out of
(Figure 17-2).