Hart Communication - Siemens SITRANS F FST030 Operating Instructions Manual

3.5

HART communication

Communication is via the HART protocol, using:
①
②
③
Figure 3-1
The flowmeter can be used in a number of system configurations to enable simple, secure,
and reliable data transmission over long distances.
System communication
Table 3- 1
Manufacturer ID
Device type
HART protocol revision
Device revision
Note: Version numbers and other references shown above are typical or example values.
Device description files
Available EDD drivers:
● SIMATIC PDM
● FDT/DTM
● AMS suite
● 375 Field Communicator
The drivers can be downloaded here:
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC
SIMATIC PLC system with HART interface
PC with SIMATIC PDM or similar application
HART modem
System integration example
HART protocol identification data
42 (2A Hex)
34 (22 Hex)
7.5
2
Manufacturer ID parameter
Device type parameter
HART protocol revision parameter
Device revision parameter
Description
3.5 HART communication
25