Operating The Fst030; Fixed Display Texts - Siemens SITRANS F FST030 Operating Instructions Manual

Operating

7.2 Operating the FST030

● Read only
Allows no configuration. The parameter values can be viewed only (indicated by a
symbol). No PIN code required.
● User
Allows configuration and service of all parameters except calibration parameters. Default
PIN code is 2457.
● Expert
Allows configuration and service of all parameters including flow and density calibration
parameters. Default PIN code is 2834.
PIN codes can be changed in Security (5).
Note
Lost PIN code
If the PIN code is lost, provide Siemens customer support with the transmitter serial number
(see nameplate). Siemens customer support will provide a code to be entered in PIN
recovery (5.3).
Disable access level control
If logged in as Expert you can Deactivate user PIN. As User you will not be prompted to
enter the password. Enabling the access level control can be done in Activate user PIN and
requires entering the Expert password.
Auto logout function
You will not be prompted for password for 10 minutes after the last key press.
NOTICE
Device restart
Whenever the device is restarted, the access level is reset to Read only.
7.2 Operating the FST030
7.2.1

Fixed display texts

Some displayed texts are fixed, which means they will not change regardless of changed
display language.
70
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC