Changing The Resolution; Parameter Lists - Siemens SITRANS F FST030 Operating Instructions Manual

Operating
7.3 Reading / changing parameters
7.3.1.1

Changing the resolution

In order to change the resolution of the process value shown in the operation view (for
example mass flow), set the decimal places parameter for the selected process value, for
example the decimal places for process value Mass flow is defined in Decimal places
(2.2.2.4).
The resolution can also be changed by changing the resolution of one configuration
parameter for this process value (for example Low flow cut-off (2.2.2.5)). Any changes in
resolution will change the resolution of all configuration parameters for this process value as
well.
7.3.2

Parameter lists

Parameter list - read only
Table 7- 8
Key
Parameter list - editable
The help texts describe the possible adjustments of the respective parameters.
Table 7- 9
Key
78
Key functions - read only
Function
Exit parameter list
No functionality
No functionality
No functionality
Key functions - edit
Function
Escape the view without changing the value.
Select the option above.
Select the option below.
Confirm selected option.
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC