Application Questionnaire - Siemens SITRANS F FST030 Operating Instructions Manual

9.2

Application questionnaire

In case the device needs service, the factory will typically request information about
application and flowmeter.
Fill in this form and attach it to a Support request on:
Services & Support (http://www.siemens.com/automation/service&support)
To:
"Your local Siemens contact"
Note
Sketch
It is recommended to prepare a diagram/sketch of the installation/application explaining inlet
and outlet conditions; distance from pump; etc.
Table 9- 2
Liquid
•
•
•
•
•
•
Flow measurement range
Nominal size
Process temperature
Ambient temperature (transmitter)
Process pressure
Gas/solid content
Explosion protection
Table 9- 3
Transmitter serial number
System type
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC
Application data
Chemical formula
Medium name
Concentration
Density
Medium viscosity at 20 °C (68 °F)
Medium viscosity at process tem-
perature
Device data
From:
Company:
E-mail:
Phone no.:
Fax no.:
Diagnosing and troubleshooting
9.2 Application questionnaire
[mPa s]
[mPa s]
[m]
87