Connecting Channels 5 And 6 - Siemens SITRANS F FST030 Operating Instructions Manual

Configura-
tion
Current
input
Active
Current
input
Passive
Relay output
Normally
open
Relay output
Normally
closed
5.4.6

Connecting channels 5 and 6

Connecting RTD (Resistance Temperature Detector) cable
Perform the following steps for each RTD cable.
1. Loosen the four lid screws and open lid.
2. Remove cap and ferrule from cable gland and slide onto cable.
SITRANS F Ultrasonic flowmeters FST030 (HART)
Operating Instructions, 08/2017, A5E35971532-AC
5.4 Transmitter power supply, communications and I/Os connection
Software configuration
Process values
Pressure
•
Medium temperature
•
Viscosity
•
Density
•
Process values
Pressure
•
Medium temperature
•
Viscosity
•
Density
•
Alarm class
Alarm item
NAMUR status signals
Alarm class
Alarm item
NAMUR status signals
Channel
2 3 4
X X
Active
X X
Passive
X X
Normally open
X X
Normally closed
Connecting
47