Transmit; Mmc - Kawai MP7SE Owner's Manual

3

Transmit

The Transmit category parameters are all SYSTEM parameters. These parameters are memorised automatically and
therefore do not need to be stored to each SETUP.
1. Transmit System Exclusive
This parameter determines whether or not System Exclusive
(SYSEX) data will be transmitted to an external MIDI device.
* For more information about System Exclusive data transmitted by the
MP7SE, please refer to page 141.
3. Fader Assign
This parameter selects the function assigned to the zone's fader.
* By default, the fader for an EXT mode zone is set to CC#07 (Volume).
4

MMC

The MMC category parameters are all SYSTEM parameters. These parameters are memorised automatically and
therefore do not need to be stored to each SETUP.
1. Transmit MMC
This parameter determines whether or not the MP7SE's recorder
control buttons will transmit MMC (MIDI Machine Control) data.
3. MMC Commands
These parameters allow MMC or Realtime commands to be assigned to the MP7SE's six recorder control buttons.
* By default, the main MMC commands should be correctly mapped to the MP7SE's recorder control buttons.
 Assignable recorder control commands
MMC Commands
01 STOP
02 PLAY
03 DEFERRED PLAY
04 FAST FORWARD
05 REWIND
06 RECORD STROBE
07 RECORD EXIT
Realtime Commands
FA Realtime START
FB Realtime CONTINUE
FC Realtime STOP
o , o
n ff
cc#0 ~ cc#119, a
ftertoucH
o , o
n ff
08 RECORD PAUSE
09 PAUSE
0A EJECT
0B CHASE
0C COMMAND ERROR RESET
0D MMC RESET
2. Transmit Recorder
This parameter determines whether or not data will be
transmitted to an external MIDI device when playing internal
recorder songs.
2. MMC Dev. ID
This parameter determines the device ID of the MMC (MIDI
Machine Control).
13
 Recorder control buttons
The illustration below indicates the names of the six recorder
control buttons:
RESET
A B REW

o , o
n
: 0 ~ 127
value
, 3
mmc commands realtime commands
REC PLAY
FF
ff
57