Global Section - Kawai MP7SE Owner's Manual

Global Section

1
EQ
The EQ function consists of a 4-band graphic equaliser that can be used to shape the overall tone of the MP7SE's
internal sounds. Two of the mid-range frequency bands can also be adjusted as a parametric equaliser.
The equaliser settings are common for all zones.
* For more information about common parameters, please refer to page 38.
 Turning EQ ON or OFF
Press the EQ button to turn the MP7SE's equaliser ON or OFF.
The LED indicator for the EQ button will turn ON or OFF to
indicate the current status of the equaliser.
 EQ parameters
Page Knob Parameter
A Low Gain
B High Gain
1
C Mid1 Gain
D Mid2 Gain
A Mid1 Q
B Mid2 Q
2
C Mid1 Freq.
D Mid2 Freq.
 Adjusting EQ parameters
Press and hold the EQ button.
The gain page of the EQ will be shown in the LCD display.
Press the CURSOR  buttons to select the desired EQ
parameter, then press the +/YES or -/NO buttons to increase or
decrease the values.
Alternatively, turn the control knobs (A, B, C, D) to adjust the EQ
parameter assigned to that knob.
* The F1~F4 buttons can also be used to select the desired EQ parameter.
If the parameter is already selected, the F1~F4 buttons can be used to
alternate between the gain and frequency pages of the EQ.
34
Description
Adjusts the gain of the low range frequency band (20 ~ 100 Hz).
Adjusts the gain of the high range frequency band (5000 ~ 20000 Hz).
Adjusts the gain of the Mid1 frequency band (200 ~ 3150 Hz).
Adjusts the gain of the Mid2 frequency band (200 ~ 3150 Hz).
Adjusts the bandwidth of the Mid1 band.
Adjusts the bandwidth of the Mid2 band.
Adjusts the frequency of the Mid1 band.
Adjusts the frequency of the Mid2 band.
Next
page
LED indicator ON:
Equaliser is turned ON
Value range
–10 dB ~ +10 dB
–10 dB ~ +10 dB
–10 dB ~ +10 dB
–10 dB ~ +10 dB
0.5 ~ 4.0
0.5 ~ 4.0
200 Hz ~ 3150 Hz
200 Hz ~ 3150 Hz
Select EQ parameter
Decrease/Increase values