Key Setup - Kawai MP7SE Owner's Manual

EDIT Menu parameters
5

Key Setup

1. Touch Curve
This parameter selects the touch response curve of the keyboard
for the selected zone.
* For more information about touch curve types, please refer to page 46.
* For information about creating User Touch Curves, please refer to the User
Edit explanation in the SYSTEM menu chapter (page 112).
* This parameter will not be available when tonewheel organ mode is
selected.
3. Trigger Mode
This parameter selects the trigger point for the keyboard.
A fast/higher trigger point may be useful when playing sounds that are
traditionally played on non-weighted keyboards such as organ or synth.
Trigger Mode Description
Normal The keyboard trigger point is normal.
Fast The keyboard trigger point is earlier than normal.
* When either Fast mode is selected, all touch response functionality will be
disabled, and an asterisk will be shown beside the relevant Touch Curve,
Dynamics, Min.Touch, and VeloSW parameters.
* This parameter will only by visible for the MAIN zone, but when either Fast
mode is selected will affect all zones.
6. Key Scaling Damping
This parameter determines whether or not damping (velocity
reduction) should be applied to a zone over a specific range.
This parameter may be useful when layering a piano sound with a strings
sound, in order to reduce the level of the strings in the higher key range.
8. Key Range Zone Lo
This parameter defines the bottom key of the selected zone.
* For more information about adjusting the zone key range, please refer to
page 24.
58
(EXT mode)
2. Dynamics
6 + 5
types user
This parameter adjusts the keyboard response (velocity
compression) of the selected zone independently of the touch
curve.
When the value is 10 (default), the keyboard response is normal. As the
value decreases the keyboard response gradually becomes less dynamic,
and when set to OFF becomes completely flat (i.e. fixed touch response).
* For more information about dynamics, please refer to page 46.
4. Octave Shift
n , f
ormal ast
This parameter adjusts the amount of octave transposition for
the selected zone.
5. Zone Transpose
This parameter adjusts the amount of transposition for the
selected zone.
7. Key Scaling Key
o , o
n ff
This parameter defines the point on the keyboard from which
Key Scaling Damping should be applied, up to the highest key.
9. Key Range Zone Hi
: a0 ~ c8
range
This parameter defines the top key of the selected zone.
* For more information about adjusting the zone key range, please refer to
page 24.
: o , 1 ~ 10
value ff
: –3 ~ +3
value octaves
: –12 ~ +12
value
: a0 ~ c8
range
: a0 ~ c8
range