Overview Of The Edit Menu - Kawai MP7SE Owner's Manual

Overview of the EDIT Menu

The EDIT menu can also be used to adjust parameters for zones in EXT mode. As with the INT mode EDIT menus, the
parameters are grouped by category, providing direct control over any connected MIDI devices.
As with zones set to INT mode, this collection of parameters, together with other adjustable settings, can be stored
as a SETUP memory (page 65). The MP7SE provides 256 user programmable SETUP memories.
 About Common parameters ( icon)
Unless stated, parameter settings for the MAIN, SUB1, SUB2, and SUB3 zones are independent for each zone. However, parameters
marked with a icon are common for all four zones. For example, changing the Right Pedal Assign parameter for the MAIN zone
will automatically change the Right Pedal Assign parameter for the SUB1, SUB2, and SUB3 zones.
 About System parameters (
EXT mode zone parameters marked with a
the STORE function.
 EXT mode zone parameters
No. Category
1 Channel/Program MIDI Transmitting Channel, Program, Bank MSB, Bank LSB
2 SETUP
3 Transmit
4 MMC
5 Key Setup
6
Controllers
7 Knob Assign
 Entering the EDIT Menu
When the zone is in EXT mode:
Press the EDIT button.
The LED indicator for the EDIT button will turn ON, and the Edit
Menu for the selected zone will be shown in the LCD display.
MAIN
zone
selected
54
icon)
icon are SYSTEM parameters and memorised automatically, without the need to use
Parameters
Send Program, Send Bank, Send Volume, Send Knobs
Transmit System Exclusive, Transmit Recorder, Fader Assign
Transmit MMC, MMC Device ID, MMC Commands
Touch Curve, Dynamics, Trigger Mode, Octave Shift, Zone Transpose, Key Scaling Damping,
Key Scaling Key, Key Range Zone Lo, Key Range Zone Hi, Velocity Switch, Velocity Switch Value, Solo,
Solo Mode, Transmit Keyboard
Damper Pedal, Damper Pedal Assign, Half Pedal Values, Pitch Bend, Pitch Bend Range,
Modulation Wheel, Modulation Wheel Assign, Modulation Wheel Range, Footswitch Pedal,
Footswitch Pedal Assign, Expression Pedal, Expression Pedal Assign, Right Pedal,
Right Pedal Assign, Center Pedal, Center Pedal Assign, Left Pedal, Left Pedal Assign
Knob A Assign, Knob B Assign, Knob C Assign, Knob D Assign,
Knob2 A Assign, Knob2 B Assign, Knob2 C Assign, Knob2 D Assign
(EXT mode)
* To change the selected zone, press the F1~F4 buttons.
LED indicator ON:
EDIT mode is turned ON