Display Section; Edit Section; Store Button; Exit Button - Kawai MP7SE Owner's Manual

Part Names & Functions
EFFECTS Section
* Press and hold each button to show the respective settings pages of the
EDIT menu in the LCD display.

DISPLAY Section

EDIT Section

14
EFX1/EFX2/EFX buttons
These buttons turn the effects for each zone ON or OFF. The
MAIN zone has two effect modules, while the SUB1, SUB2, and
SUB3 zones have one effect module each.
AMP button
This button turns the amp simulator for the MAIN zone ON or
OFF.
REVERB buttons
These buttons turn the reverb for each zone ON or OFF.
LCD Display
The LCD display provides a visual indication of the selected zone
and sound, parameter values, and the status of other functions
when active.
A/B/C/D control knobs
These knobs adjust displayed parameter values in real-time.
* EDIT menu parameters can be freely assigned to each of the four knobs in
the Knob Assign page of the EDIT menu (page 51).
F1/F2/F3/F4 buttons
These buttons select the four zones (MAIN, SUB1, SUB2, SUB3)
to be displayed and controlled. In other modes (e.g. Recorder)
these buttons also select additional functions.
INT / MIDI button
This button is used in conjunction with the +/YES or –/NO
buttons to change the zone mode (INT, EXT, or BOTH).
LOCK ( ) button
This button locks the MP7SE's control panel, thus preventing
any accidental button pushes during a performance.

STORE button

This button stores edited SOUNDS, or full panel settings to the
SETUP and POWERON memories.

EXIT button

This button exits the current mode or page.

EDIT button

This button enters the EDIT menu. When the EDIT menu is
displayed, this button also enters the selected parameter
category page.
CURSOR buttons
These buttons move the selection cursor and scroll through the
various pages of the EDIT menu.
– / NO + / YES buttons
These buttons decrease or increase the value of the selected
parameter, and also cancel or confirm operations that require
user interaction (e.g. Erasing data).