Kawai MP7SE Owner's Manual page 70

Song Recorder
(Internal memory)
1
Recording a song
4. Starting the song recorder (recording)
Press a key on the keyboard.
The LED indicators for the  and / buttons will turn ON, the
bar/beat counter shown in the centre of the LCD will begin to
increase, and recording will start.
Bar
(of song)
* Recording can also be started by pressing the / button. This allows a
rest period or empty bar to be inserted at the beginning of the song.
* The metronome can be enabled before recording to assist with timing etc.
When enabled, a one bar count-in will be added before recording begins.
5. Stopping the song recorder
Press / recorder control
the
The LED indicators for the  and / buttons will turn OFF, and
recording will stop.
* The F4 function button (STOP) can also be used to stop recording.
After a brief pause, the MIDI player screen will be shown in the
LCD display.
For information about playing the recorded song, please refer to
page 71.
70
(cont.)
Beat
(of bar)
button.
* The maximum recording capacity is approximately 90,000 notes, with
button and pedal presses also counted as one note.
* If the maximum recording capacity is reached during recording, the
recorder will stop automatically.
* To prevent data loss, avoid turning the power OFF while the MP7SE is
saving internal recorder songs.
* Recorder songs will remain in memory after the power is turned OFF.
LED indicators ON:
Recording is in progress
LED indicators OFF:
Recording has stopped