Effects Section; Reverb; Reverb Parameters - Kawai MP7SE Owner's Manual

Effects Section

1

Reverb

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert
hall. The MP7SE offers 6 types of high quality reverb, with independent ON/OFF and depth controls for each zone.
The reverb type, pre-delay, and time parameters, however, are common for all zones.
* For more information about common parameters, please refer to page 38.
 Reverb types
Reverb type
Room
Lounge
Small Hall
Concert Hall
Live Hall
Cathedral
 Turning reverb ON or OFF
Press the REVERB button for the desired zone to turn reverb for
that zone ON or OFF.
The LED indicator for the zone's REVERB button will turn ON or
OFF to indicate the current status of the reverb.
 Changing the reverb type and additional parameters
Press and hold the REVERB button for the desired zone.
The REVERB page of the zone's EDIT menu will be shown in the
LCD display.
Common
parameters:
See page 38
Turn the four control knobs (A, B, C, D) to change the reverb type
and adjust additional reverb parameters.
Press and hold the REVERB button again to exit.
 Reverb parameters
Knob Parameter Description
A Type Changes the type of environment.
B PreDelay Adjusts the delay time before the reverberation is applied.
C Time Adjusts the decay length/speed of the reverberation.
D Depth Adjusts the depth of the environment (amount of reverberation).
Description
Simulates the ambiance of a small rehearsal room.
Simulates the ambience of a piano lounge.
Simulates the ambiance of a small hall.
Simulates the ambiance of a concert hall or theater.
Simulates the ambiance of a live hall or stage.
Simulates the ambiance of a large cathedral.
LED indicator ON:
Reverb is turned ON
Type
Time
Value range
(see table above)
0 ~ 200 ms
300 ms ~ 10.0 s
0 ~ 127
PreDelay
Depth
(depending on type)
27