Erasing A Song - Kawai MP7SE Owner's Manual

5

Erasing a song

This function is used to erase songs that have been recorded incorrectly, or are simply no longer required.
1. Selecting the song to erase
After turning Recorder mode ON and recording a song:
Turn control knob C to select the song memory to be erased.
Song
memory
2. Showing the additional recorder functions
Press the F2 function button (PAGE).
An additional page of recorder functions will be shown in the
LCD display.
3. Selecting the Erase Song function
Turn control knob C to highlight the Erase Song function.
Erase
highlighted
* The CURSOR buttons can also be used to move the selection cursor.
Press the +/YES button to select the Erase Song function.
The Erase Song confirmation screen will be shown in the LCD
display.
4. Confirming the Erase Song operation
Press the F2 button (YES) to confirm the Erase Song operation,
or the F3 (NO) button to return to the previous screen.
Song
memory
* To erase all recorder songs, use the Reset Recorder function in the Reset
category of the SYSTEM menu (page 117).
* The CURSOR  buttons can also be used to alternate between pages.
Erase Song
function
* It is also possible to select the Erase Song function at any time by pressing
the  and / recorder control buttons simultaneously.
F2 button:
YES: Confirm
* The +/YES and –/NO buttons can also be used to confirm or cancel the
Erase Song operation.
F3 button:
NO: Cancel
77