Kawai MP7SE Owner's Manual page 59

10./11. Velocity Switch / Velocity Switch Value
These parameters enable velocity switching, and set the velocity switch type and value.
Velocity Switching is useful when combining multiple zones, allowing different sounds to be played depending on the velocity of the key strike.
Switch Mode Description
Off The selected sound will play normally (i.e. no velocity switching).
Soft The selected sound will play only when the velocity is lower than the defined velocity switch value.
Loud The selected sound will play only when the velocity is higher than the defined velocity switch value.
* For more information about velocity switching, please refer to page 48.
12. Solo
This parameter determines whether or not playing will be
restricted to single notes, even when more than one note is
played simultaneously.
This parameters can be used to effectively simulate the performance
characteristics of a monophonic synthesizer.
14. Transmit Keyboard
This parameter determines whether or not keyboard Key ON/
Key OFF event data will be transmitted to an external MIDI
device.
13. Solo Mode
o , o
n ff
This parameter selects the solo mode for the selected zone.
Solo Mode Description
Last Play the last note of a group of notes.
High Play the highest note of a group of notes.
Low Play the lowest note of a group of notes.
o , o
n ff
: o , s , l / : 0 ~ 127
mode ff oft oud value
l , H , l
ast igH ow
59