Pedal/Mod; Left Pedal Mode - Kawai MP7SE Owner's Manual

SYSTEM Menu Parameters & Functions
2

Pedal/Mod.

1. Damper Pedal Mode
This parameter determines the global operation for the included
F-10H damper pedal.
* The default setting is Normal.
3. FSW Pedal Mode
This parameter determines the global operation for the
footswitch (FSW) pedal.
* The default setting is Normal.
5. Modulation Wheel Curve
This parameter changes the output level curve for the
modulation wheel, providing additional control over the speed
of modulation wheel controlled effects.
* The default setting is Normal.
Normal curve
Pedal/Wheel Position
7. Right Pedal Mode
This parameter determines the global operation for the right
pedal of the optional GFP-3 pedal unit.
* The default setting is Normal.

9. Left Pedal Mode

This parameter determines the global operation for an ordinary
foot switch pedal or the left pedal of the optional GFP-3 pedal
unit.
* The default setting is Normal.
108
2. Half Pedal Adjust
5
functions
This parameter adjusts the point at which the damper/sustain
pedal becomes effective (i.e. when the dampers of the piano
begin to lift from the strings).
This parameter may be useful for pianists that habitually rest their
right foot on the damper/sustain pedal, but do not necessarily wish
to sustain the sound.
* The default setting is 5.
4. FSW Pedal Polarity
5
functions
This parameter changes the polarity of the ordinary footswitch
(FSW) pedal.
The MP7SE's foot switch terminal is designed for use with 'Normal
Close' polarity pedals. If using a foot switch with 'Normal Open'
polarity, please change this parameter to Reverse.
* The default setting is Normal.
6. EXP Pedal Curve
n , s , f
ormal low ast
This parameter changes the output level curve for the
connected expression (EXP) pedal, providing additional control
over the speed of expression pedal controlled effects.
* The default setting is Normal.
Slow curve
Pedal/Wheel Position
8. Center Pedal Mode
5
functions
This parameter determines the global operation for the centre
pedal of the optional GFP-3 pedal unit.
* The default setting is Normal.
 Pedal modes
5
functions
Mode
Normal
Setup+
Setup-
Playback
Metro.
Pedal/Wheel Position
Description
The pedal will use the assigned EDIT menu function.
The pedal will select the next SETUP memory.
The pedal will select the previous SETUP memory.
The pedal will start/stop song playback.
The pedal will start/stop the metronome.
: 1 ~ 10
value
n , r
ormal everse
n , s , f
ormal low ast
Fast curve
5
functions