Kawai MP7SE Owner's Manual page 33

 Adjusting the organ's drawbar registration
While the tonewheel edit screen is shown in the LCD display, and
the 16' drawbar group tab is selected:
Use the zone faders to adjust the position of the first four organ
drawbars.
16' drawbar
group
selected
Turn the control knobs (A, B, C, D) to adjust the position of the
next four organ drawbars.
Finally, press the +/YES or –/NO buttons to adjust the position of
the last organ drawbar.
 Changing the selected drawbar group
Press the F1~F4 function buttons to select which four drawbars
are adjusted by the zone faders.
2' drawbar
group
selected
 Changing organ percussion settings and rotary effect speed
While the tonewheel edit screen is shown in the LCD display:
Press the MAIN button to turn percussion ON or OFF, and the
SUB buttons to adjust the percussion characteristics.
Fast rotary
Percussion
enabled
Press the SW1 button or FSW pedal to change the speed of the
rotary effect from slow to fast.
drawbars
adjusted by MAIN:
Drawbar:
zone faders
Knob A:
2 2/3' drawbar
Knob C:
1 3/5' drawbar
drawbars
adjusted by
zone faders
* The control knob and –/NO and +/YES button drawbar assignments will
change depending on the selected zone faders.
SUB1: SUB2:
16' 5 1/3' 8'
–/NO or +/YES:
1' drawbar
Volume: Speed:
Normal / Soft Slow / Fast
SUB3:
4'
Knob B:
2' drawbar
Knob D:
1 1/3' drawbar
Harmonic:
2nd / 3rd
33