Kawai MP7SE Owner's Manual page 29

Table of Contents

 Changing the effect category, type and additional parameters

Press and hold the EFX button for the desired zone.

The first EFX page of the zone's EDIT menu will be shown in the

LCD display.

 arrow:

Turn the control knobs (A, B, C, D) to change the effect category,

type, and adjust additional effect parameters.

* The number of adjustable EFX parameters will vary depending on type.

For more information, please refer to page 128.

* Press the F1~F4 FUNCTION buttons (corresponding to the selected zone)

to scroll through the different parameter pages.

Press and hold the EFX button again to jump to the first EFX

page of the EDIT menu, and once again to EXIT.

 Eff.SW Mode parameter (SYSTEM menu)

The Eff.SW Mode parameter in the SYSTEM:Utility menu defines the extent to which EFX and other settings change when selecting sounds.

When this parameter is set to 'Fixed' mode, it is possible to copy the same EFX settings to multiple sounds.

* For more information about the Eff.SW Mode parameter, please refer to page 106.

 About Substitute effects for SUB1/SUB2/SUB3 zones

As noted above, the total number of effect types available for the MAIN zone is much larger than that of the SUB zones. Therefore, when

assigning a sound to a SUB zone that was prepared using an effect only available for the MAIN zone, the MP7SE will automatically select

the closest 'substitute' effect. An

The example below shows the 'Classic' AutoPan effect being substituted for the 'Standard' AutoPan effect.

* Only the EFX1 effect will be substituted. Any effects that are assigned to EFX2 will be disregarded.

MAIN zone EFX1 screen

A sound prepared on the

MAIN zone with 'Classic'

AutoPan effect applied.

Page 1/2

icon will also be shown beside the type parameter to indicate that a substitute effect is being used.

Table of Contents