Amp Simulator; (Main Zone); Amp Type - Kawai MP7SE Owner's Manual

2

.2 Amp Simulator

1. Amp Type

This parameter selects the simulated amplifier type.
* For more information about the various Amp Simulator model types,
please refer to page 30.
3. Level
This parameter adjusts the volume of the simulated amplifier.
* For more information about the Amp Simulator, please refer to page 30.
4. Amp EQ Lo
This parameter adjusts the level of the low frequencies of the
simulated amplifier.
* This parameter functions independently of the global EQ.
* For more information about the Amp Simulator, please refer to page 31.
6. Amp EQ Hi
This parameter adjusts the level of the high frequencies of the
simulated amplifier.
* For more information about the Amp Simulator, please refer to page 31.
* This parameter functions independently of the global EQ.
8. Mic Type
This parameter selects the type of microphone used for the
simulated amplifier.
Mic Type Description
A microphone with a very broad frequency
Condenser
response that is typically found in studios.
A microphone with a more limited frequency
Dynamic
response that is typically used for live playing.
* For more information about the Amp Simulator, please refer to page 31.
10. Ambience
This parameter adjusts the level (mix ratio) of an additional set
of stereo microphones, that are placed away from the simulated
amplifier in order to capture the ambient sound within a room.
* For more information about the Amp Simulator, please refer to page 31.

(MAIN zone)

2. Drive
5
types
This parameter adjusts the amount of overdrive produced by
the simulated amplifier.
* For more information about the Amp Simulator, please refer to page 30.
: 0 ~ 127
value
5. Amp EQ Mid
: –10 db ~ +10 db
value
This parameter adjusts the level of the mid frequencies of the
simulated amplifier.
* This parameter functions independently of the global EQ.
* For more information about the Amp Simulator, please refer to page 31.
7. Mid Frequency
: –10 db ~ +10 db
value
This parameter adjusts the mid frequency band of the
simulated amplifier, levelled by the Amp EQ Mid parameter.
* For more information about the Amp Simulator, please refer to page 31.
* This parameter functions independently of the global EQ.
9. Mic Position
c , d
ondenser ynamic
This parameter selects the position of the microphone used for
the simulated amplifier.
Mic Position
On Axis
Off Axis
* For more information about the Amp Simulator, please refer to page 31.
: 0 ~ 127
value
value
value
Description
The microphone is placed in the centre of the
speaker, producing a direct, aggressive sound with
strong high/mid range.
The microphone is placed to the side of the speaker,
producing a smoother and more ambient sound.
: 0 ~ 127
value
: –10 db ~ +10 db
: 200 H ~ 3150 H
z z
o a , o a
n xis ff xis
41