Kawai MP7SE Owner's Manual page 44

EDIT Menu parameters
3
Sound
(MAIN zone, TONEWHEEL mode)
1. External Control
This parameter determines whether or not the toneweel organ
drawbars can be adjusted by external MIDI devices. When set
to CC# or MIDI Ch, an additional parameter page will appear,
allowing CC# or MIDI channels to be assigned to each drawbar.
* This is a SYSTEM parameter and therefore memorised automatically. For
more information about SYSTEM parameters, please refer to page 106.
 MIDI CC# Drawbar Assign
Knob C:
select
drawbar
Turn control knob C to select the drawbar, and control knob D
to assign the MIDI CC#.
44
(INT mode)
2. MIDI CC#
o , midi cc# midi c
ff H
This parameter sets the CC# used for adjusting tonewheel organ
drawbars when MIDI Control is set to MIDI Ch.
* This is a SYSTEM parameter and therefore memorised automatically. For
more information about SYSTEM parameters, please refer to page 106.
 MIDI Ch Drawbar Assign
: cc#0 ~ cc#119
value
Knob D:
assign
MIDI CC#
Turn control knob C to select the drawbar, and control knob D to
assign the MIDI channel.
Knob C:
select
drawbar
: cc#0 ~ cc#119
value
: 01 ~ 16
value cH cH
Knob D:
assign
MIDI Ch