Amp Simulator; (Main Zone Only) - Kawai MP7SE Owner's Manual

Effects Section
3

Amp Simulator

The tonal character of an amplifier or speaker cabinet is an important component of vintage electric piano sounds.
The MP7SE's Amp Simulator function features 5 typical amplifier types and a selection of adjustable parameters.
 Amp types
Amp type Description
S. Case A suitcase type amplifier, commonly used for vintage electric piano sounds.
M. Stack A British valve guitar amplifier, known for its 'crunchy' tonal character.
J. Combo A popular Japanese solid-state amplifier favoured for its clean, yet powerful sound.
F. Bass An American valve bass amplifier that became popular for guitar, harmonica, and other instruments.
A valve amplifier and speaker enclosed within a wooden cabinet, originally intended for drawbar organ
L. Cabi
sounds, but also used with electric pianos to produce a distinctive 'shimmering' sound.
 Turning the Amp Simulator ON or OFF
Press the MAIN zone's AMP button to turn the amp simulator
ON or OFF.
The LED indicator for the AMP button will turn ON or OFF to
indicate the current status of the amp simulator.
 Changing the Amp type, adjusting drive, and level parameters
Press and hold the MAIN zone's AMP button.
The first AMP page of the EDIT menu will be shown in the LCD
display.
 arrow:
Next page
Turn the control knobs (A, B, C) to change the amp type, and
adjust the drive and level parameters.
* For more information about additional Amp Simulator parameters, please
refer to page 41.
* Press the F1 FUNCTION buttons (corresponding to the MAIN zone) to scroll
through the different AMP parameter pages.
Press and hold the AMP button again to jump to the first AMP
page of the EDIT menu, and once again to EXIT.
30

(MAIN zone only)

Page 1/3
Amp Simulator is turned ON
Amp Type
Level
* Above knob assignments will change depending on AMP page displayed.
LED indicator ON:
Drive