Transmitting Program Change Number; Transmit Program Change On/Off - Kawai EP2 Owner's Manual

After selecting the "MIDI Channel" function by pressing the Strings
button, use the Value buttons to select your MIDI channel. The LED
display shows the currently selected channel number.
In order to exchange MIDI information with another MIDI instrument, you must first set the two
connected instruments to the same channel.
When the power is first turned on, the EP2 always selects "on1" which means omni on, channel 1.
If you change it to 1 through 16, omni automatically turns off.
8. TRANSMITTING PROGRAM CHANGE NUMBER
This function allows the EP2 to transmit program change numbers beyond the 21 pre-defined
numbers transmitted by the Sound buttons. Using this function, you can send any number from 1
to 128,
After selecting the "Transmitting Program Change Number" func-
tion by pressing the Harpsi/Mallets button, use the Value buttons to
select your desired number. The LED display shows the program
change number. To send the program change number, press both
Value buttons simultaneously.
This determines whether the EP2 piano's sound will be played from the piano's keyboard ("ON")
or only from an external MIDI instrument ("OFF").
Even with local control "off" the piano's keyboard will still transmit to an external MIDI instrument
or personal computer.
After selecting the "Local Control" function by pressing the Clavi/
ER Guitar button, use the Value buttons to turn Local Control on and off.
The LED display shows whether Local Control is on or off.
10. TRANSMIT PROGRAM CHANGE ON/OFF
This determines whether or not the EP2 will transmit program change information when pressing
the Sound buttons. When this is turned on, pressing the Sound buttons will send the program change
numbers as listed in page 32.
After selecting the "Transmit Program Change On/Off" function by
pressing the Bass button, use the Value buttons to turn Transmit
Program Change on and off. The LED display shows whether or not
program change numbers will be transmitted.
When the power is first turned on, the Transmit Program Change On/Off function is always "on".