Display Section; Edit Section; Global Section - Kawai MP11SE Owner's Manual

Part Names & Functions

DISPLAY Section

EDIT Section

– / NO + / YES buttons
These buttons decrease or increase the value of the selected
parameter, and also cancel or confirm operations that require
user interaction (e.g. Erasing data).

GLOBAL Section

14
LCD Display
The LCD display provides a visual indication of the selected
section and sound, parameter values, and the status of other
functions when active.
A/B/C/D control knobs
These knobs adjust displayed parameter values in real-time.
* EDIT menu parameters can be freely assigned to each of the four knobs in
the Knob Assign page of the EDIT menu (page 49).
F1/F2/F3/F4 buttons
These buttons select the three internal sound sections (PIANO,
E.PIANO, SUB) to be displayed and controlled. In other modes
(e.g. Recorder) these buttons also select additional functions.
INT/MIDI button
This button toggles between showing the internal sound
sections (PIANO, E.PIANO, SUB), and the four MIDI OUT zones in
the LCD display.
LOCK ( ) button
This button locks the MP11SE's control panel, thus preventing
any accidental button pushes during a performance.
STORE button
This button stores edited SOUNDS, or full panel settings to the
SETUP and POWERON memories.
EXIT button
This button exits the current mode or page.
EDIT button
This button enters the EDIT menu. When the EDIT menu is
displayed, this button also enters the selected parameter
category page.
CURSOR buttons
These buttons move the selection cursor and scroll through the
various pages of the EDIT menu.
EQ button
This button turns the global EQ ON or OFF.
Press and hold the button to show the EQ settings screen in the
LCD display.
TRANSPOSE button
This button turns the TRANSPOSE function ON or OFF.
Press and hold the button to show the transpose settings pop-
up in the LCD display.
LOCAL OFF
This button disables the internal connection between the
MP11SE's keyboard and tone generators.