Home >
Scan
>
Scan Using the Scan Button on Your Brother Machine
Server
Send Scanned Data to an Email Server
Related Models: ADS-2700W
Before using this feature, you must first configure your E-mail Server settings using Web Based Management.
See Related Information: Send an Email Securely
1. Load your document.
2. Press d or c to display [to Email Server], and press it.
3. Do one of the following to enter the destination email address:
•
To select an email address from the Address Book, do the following:
a. Press [Address Book].
b. Press a or b until you find the name you are looking for.
c. Press the name from the result.
d. Press [OK].
4. Press [OK].
5. To change the scan settings, press [Options]. Configure the following settings, and then press [OK]:
•
[2-sided Scan]
•
[Scan Type]
•
[Resolution]
•
[File Type]
•
[Document Size]
•
[Skip Blank Page]
•
[Advanced Settings]
•
To configure other settings, press [Advanced Settings].
•
To save the settings as a shortcut, press [Save as Shortcut].
•
If signed PDF was selected from the [File Type] drop-down list, you must configure the certificate
settings using Web Based Management.
6. Press [Start].
The machine starts scanning, and then sends the scanned document to the email address directly.
Related Information
•
Scan Using the Scan Button on Your Brother Machine
•
Use TX Verification Mail
•
Send an Email Securely
> Send Scanned Data to an Email
42