Purpose
Turn the Auto Start Scan Mode On
Turn the wireless network connection
On
Change the Language Displayed on
the LCD
Change for Daylight Saving Time
Automatically
Related Information
•
Change Machine Settings from the Control Panel
Operation
Settings > General Setup >
Auto Start Scan Mode > On
Settings > Network > WLAN >
WLAN Enable
Settings > Initial Setup >
Local Language
Settings > Initial Setup >
Date & Time > Auto Daylight
Description
Auto Power Off will be
activated when all of these
conditions are met:
•
Auto Power Off setting is
not set to Off.
•
The machine has been in
Sleep Mode for more than
the preset period.
Scanning starts automatically using
the settings saved as the auto scan
shortcut (Shortcut 21) when you place
a document in the ADF. It is not
necessary to press the Scan Button.
The auto scan shortcut can be
registered from Shortcuts, which is
used to register the regular shortcuts.
Turn the wireless network connection
On or Off.
Change your LCD language.
Set the machine to change
automatically for Daylight Saving
Time. It will reset itself forward one
hour in the spring and backward one
hour in the autumn. Make sure you
have set the correct date and time in
the Date and Time setting.
179