Load A Plastic Card - Brother ADS-2200 Online User's Manual

Home > Paper Handling

Load a Plastic Card

1. Adjust the Paper Guides (1) to fit the width of your document.
2. Place the card, face down, top edge first in the ADF between the Paper Guides until you feel it touch the
inside of the machine.
• Load only one plastic card at a time.
• Certain types of plastic cards may be scratched when scanned.
• Rigid cards may not be fed correctly.
• If the surface of the card is dirty with grease marks (for example, fingerprints) or similar, wipe the dirt off
before scanning.
Related Information
• Load Documents
> Load Documents > Load a Plastic Card
1
26