Brother ADS-2200 Online User's Manual page 151

Home > Troubleshooting
Cannot Complete the Wireless Network Setup Configuration
If You Cannot Complete the Wireless Network Setup Configuration
Related Models: ADS-2700W
Turn your wireless router off and back on. If that does not resolve the problem, try to configure the wireless
settings again. If this still does not resolve the problem, use the Actions listed in this table.
Cause
Your security settings (SSID/
Network Key (Password))
are not correct.
Your Brother machine's MAC
address is not allowed.
Your wireless access point/
router is in stealth mode (not
broadcasting the SSID).
Your security settings (SSID/
Password) are not correct.
Your Brother machine is
placed too far from your
mobile device.
There are some obstructions
(walls or furniture, for
example) between your
machine and the mobile
device.
There is a wireless
computer, Bluetooth-
supported device,
microwave oven, or digital
cordless phone near the
Brother machine or the
mobile device.
If you have checked and
tried all of the actions, but
still cannot complete the Wi-
Fi Direct configuration.
Your machine is in Sleep
Mode and cannot configure
the network settings on Web
Based Management.
The enterprise wireless
network is not configured
correctly.
> If You Are Having Difficulty with Your Machine
Action
Confirm your security settings.
• The manufacturer's name or model number of the wireless
access point/router may be used as the default security settings.
• See the instructions supplied with your wireless access point/
router for information on how to find the security settings.
• Ask the manufacturer of your wireless access point/router, your
Internet provider, or your network administrator.
Confirm that the Brother machine's MAC Address is allowed in the
filter. You can find the MAC address using the Brother machine's
control panel.
• Enter the correct Network Name (SSID) and Network Key
(Password) manually.
• Check the Network Name (SSID) and Network Key (Password)
in the instructions supplied with your wireless access point/router
and reconfigure the wireless network setup.
Confirm the Network Name (SSID) and Network Key (Password).
When you are configuring the network manually, the SSID and
password are displayed on your Brother machine. If your mobile
device supports the manual configuration, the SSID and password
will be displayed on your mobile device's screen.
Move your Brother machine within about 1 metre of the mobile
device when you configure the Wi-Fi Direct network settings.
Move your Brother machine to an obstruction-free area.
Move other devices away from the Brother machine or the mobile
device.
Turn your Brother machine off and back on. Then try to configure the
Wi-Fi Direct settings again.
Turn off the Sleep Mode.
Configure the settings in Web Based Management.
> Network Problems > If You
Interface
Wireless
Wireless
Wireless
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wi-Fi Direct
Wireless
Wireless
147