Brother ADS-2200 Online User's Manual page 47

Home > Scan > Scan Using the Scan Button on Your Brother Machine
Server > Use TX Verification Mail
Use TX Verification Mail
Related Models: ADS-2700W
Use TX Verification Mail to request notification from the destination computer that your email was received and
processed. Use Web Based Management to turn the verification feature on. When Request Delivery
Notification is On, your email contains an additional field that is automatically populated with the email's arrival
date and time.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
http://192.168.1.2
3. By default, no password is required. If you have previously set a password, type it, and then click
4. Click the E-mail tab.
5. Click E-mail Send.
6. In the Request Delivery Notification field, click On.
7. Click Submit.
• Message Disposition Notification (MDN)
This field requests the status of the email message after delivery through the Simple Mail Transfer
Protocol (SMTP) transport system. After the recipient has received the message, this data is used when
the machine or user reads the received email. For example, if the message is opened and read, the
receiver sends back a notification to the original sending machine or user.
The recipient must activate the MDN field to be able to send a notification report; otherwise the request
will be ignored.
• This Brother machine cannot receive email messages. To use the TX Verification feature, you must
redirect the return notification to a different email address. Configure the email address using Web
Based Management. Access Web Based Management, click the E-mail tab, click SMTP and confirm
Device E-mail Address. Enter the email address that you want to receive the notification.
Related Information
• Send Scanned Data to an Email Server
> Send Scanned Data to an Email
.
43